logo

Gallery

Ferritic 430 Stainless Steel Sheet With Good Formability

  • Moda 430/4016 EN 1.4016, ASTM TYPE 430 / UNS S43000

    General characteristics. Moda 430/4016 is a classic 16% chromium ferritic stainless steel. Good corrosion resistance in mildly corrosive environments combined with good formability have made this product one of the most used non-hardenable ferritics, especially in indoor environments.

  • 430 , S43000, SAE 51430, Cr CHROMIUM STAINLESS STEEL | AMS

    ALSO LOOK FOR 430 UNDER OUR CASTINGS PAGE. Description. 430 stainless steel is categorized by its high chromium content. Ranging from 12-180, the increased levels of chromium creates a grade of stainless steel like possess good ductility and formability characteristics.

  • 400 Series Stainless Steel - Cleveland Metal Exchange

    430 Stainless Steel Type 430 Stainless Steel is a low carbon ferritic stainless steel which, in mildly corrosive environments or atmospheric exposures, has corrosion resistance approaching that of some nickel-bearing stainless steels. This alloy is oxidation resistant at elevated temperatures.

  • Development of ferritic stainless steel sheets with

    In order to develop ferritic stainless steel sheets with high formability, control of the {1 1 1} recrystallization texture has been investigated with the aim of increasing the Lankford values.

  • Stainless Steel - Grade 430 - ASKzn

    Stainless Steel - Grade 430 CS 430 Technical Data . CS 430 is a low-carbon plain chromium ferritic stainless steel.The steel has good corrosion resistance in mildly corrosive environments and good resistance to oxidation at elevated temperatures.

  • The Effect of Heating Rate on Texture and Formability of

    Typical applications of ferritic stainless steels require good formability of the material that is highly dependent on the processing route. In this study, the effects of the heating rate and peak heating temperature on the texture and deep drawability (R-value) of a 78% cold rolled, stabilized 18Cr (AISI 441) ferritic stainless steel were studied.

  • Features & Application - Stainless Steel - Products

    The most commonly used ferritic stainless steel featuring good formability and resistance to oxidation. Applications. Its typical applications include kitchen appliances, utensils and architectural materials. 409L. The main chemical composition is 11Cr - 02Ti - LCN. This stainless steel contains Ti for better weldability and machinability

  • Corrosion resistance levels in stainless steel - Ryerson

    • Good formability • Good market availability—and available in a wide range of dimensions, product forms and surface finishes. One of the most widely used of all stainless steel grades, 304, is austenitic. This heat-resistant grade offers good corrosion resistance to many chemical corrodents, as well as industrial atmospheres.

  • Stainless Steel Grades - Continental Steel & Tube Company

    Also known as "marine grade" stainless steel due to its increased resistance to chloride corrosion compared to type 304. SS316 is often used for building nuclear reprocessing plants. Most watches that are made of stainless steel are made of this grade.

  • Stainless Steel Strip | Knight Strip Metals Ltd

    The main justification for selecting Stainless Steel for a given application is its outstanding corrosion and oxidation resistance. They equally possess other exceptional properties, such as the ability to develop very high strength through cold working or heat treatment, excellent formability and the capability to withstand cryogenic temperatures, makes it a very versatile material.

  • The Effect of Heating Rate and Temperature on

    Typical applications of ferritic stainless steels require good formability of a steel that is highly dependent on the processing route. In this study, the effects of heating rate and peak temperature on the texture and formability of a 78% cold-rolled unstabilized 17%Cr (AISI 430) ferritic stainless steel were studied. The cold-rolled sheet pieces were heated in a Gleeble 3800 simulator at the

  • 430 ferrite stainless steel, 430 ferrite stainless steel

    Alibaba offers 243 430 ferrite stainless steel products. About 13% of these are Stainless Steel Pipes, 52% are Stainless Steel Sheets, and 2% are Stainless Steel Bars. A wide variety of 430 ferrite stainless steel options are available to you, such as type, certification, and standard.

  • Ferritic Stainless Steels Sheet, Coil & Plate Providing

    The following table shows the product range of standard ferritic stainless steel sheets, coil and plate available from Atlas. The Atlas range of Ferritic stainless steel flat products Ferritic Grade Group Type Form Rolling Width (mm) Thickness (mm) Finish 409 AtlasCR12Ti 430 439 AtlasF20S 444 AtlasCR12 CR CR CR, HR CR CR CR CR HR On application

  • US4465525A - Ferritic stainless steel having excellent

    A ferritic stainless steel having excellent formability, for example, in a deep drawing procedure, contains 0.04 to 0.1 weight % of C, 1.0 weight % or less of Si, 0.75 weight % or less of Mn, 10 to 30 weight % of Cr, 0.5 weight % or less of Ni, 0.025 weight % or les of N, 2 to 30 ppm of boron, and optionally, 0.005 to 0.4 weight % of an additional alloy component consisting of Al and, further

  • Stainless Steel – Specifications, Grades and Properties

    proprietary grade 430 stainless steel and the cheapest stainless steel, grade 409 stainless steel. 409 stainless steel is the material of choice for automotive exhausts due to its combination of low price, corrosion resistance and excellent formability. Austenitic Stainless Steels Adding nickel to stainless steel in sufficient

  • J409L - India’s largest stainless steel producer

    mildly corrosive environments where good formability and weldability are required. 410S is a ferritic stainless steel with higher Chromium content compared to 409 grade to FERRITIC STAINLESS STEEL General Characteristics: 430 SM is a cost effective alloy designed for 430 grade used in indoor applications which

  • Ferritic Stainless Steels - fischer CA

    430 Increased levels of chromium and carbon provide this grade of ferritic stainless with better corrosion resistance and oxidation resistance while sacrificing weldability and formability. With higher carbon and no additions of stabilizing elements such as Titanium, care must be taken when welding 430 stainless steel.

  • Stainless Steel Type 439 – Rolled Metal Products

    Type 439 is an 18% chromium, titanium stabilized ferritic stainless steel with corrosion resistance similar to that of 304/304L stainless steel. This grade may be used in the annealed, cold formed or as-welded condition in applications where other stainless steels such as Type 304/304L and Type 430 are used.

  • Ferritic Stainless Steel: A Useful Overview of Ferritic

    Ferritic stainless steel is really defined as a straight chromium non-hardenable class of stainless alloys which have chromium ranging from 10.5% to 30% and a carbon level under .20%. These steels are essentially non-hardenable by heat treatment and only slightly hardenable by cold rolling.

  • Sn-added Ferritic Stainless Steel, NSSC FW series

    Advantages and steel grade characteristics of NSSC FW2 1. While FW1 is a 16% Cr steel, it delivers corrosion and rust resistance that is equal to that of SUS304 (18C-8Ni) under regular conditions. 2. FW2 offers among the best formability of ferritic steels. By selecting the appropriate forming conditions (drawability), FW2 offers mold formability

  • Technical Data Sheet

    Technical Data Sheet ATI 441 HP™ ATI 441 HP™ Stainless Steel: Ferritic (UNS S44100) INTRODUCTION ATI 441 HP™ alloy is a heat resisting ferritic grade that provides good oxidation and corrosion resistance for applications like automotive exhaust system components.


Related Articles