Gallery

308l Welding Aws 308l 16 Steel Welding Electrode 308l Rods

  • USA 308L-16 Coated Electrode - Welding Products, Wires

    USA 308L electrodes contain extra low carbon for the welding of austenitic, low carbon 18% Cr– 8% Ni stainless steels such as AISI-304-ELC. The weld deposit of this electrode contains a maximum of 0.04% carbon, which greatly reduces the formation of chromium carbides, thereby protecting the corrosion resistant qualities of the base metal and

  • Stainless Steel Stick E308L-16 5/32" 5LB Stick Electrode

    Stainless Steel E308L-16 5/32" 5LB STICK ELECTRODE WELDING ROD DESCRIPTION: E308L-16 electrodes are used to weld unstabilized 18-8 stainless steels such as Types 301, 302, 304, 305, and 308. Weldcote Metals E308-16 electrodes provide corrosion resistance and physical properties equal to or greater than the steels for which they are recommended.

  • 3/32" x 12" Electrode(10) 308L-16 Stainless Steel TIG

    Welding; Welding Rods and Wire; 3/32" x 12" Electrode(10) 308L-16 Stainless Steel TIG Welding Rod. Stainless Steel Electrode; Conforms to AWS A5.4; 10 lb package; Similar usage as 308, but the 0.04% maximum carbon content increases resistance to intergranular corrosion.

  • USA 308L | Stainless Steel Welding Wire | Products

    Standard wire diameter (in.): .023, .030, .035, .045, 1/16, 3/32, 1/8, 5/32, 3/16. Description ER308L is similar to USA 308 but contains an average .02% carbon producing a weld deposit with good resistance against intergranular corrosion caused by carbide precipitation. USA 308L is commonly used for welding AISI types 304L, 308L, 321, and 347.

  • E308l 16 X 1/16 14 1lb Tube Stainless Steel Arc Welding

    Find many great new & used options and get the best deals for E308l 16 X 1/16 14 1lb Tube Stainless Steel Arc Welding Electrode Brazing Rods at the best online prices at eBay! Free shipping for many products!

  • Harris 308L MIG Welding Wire | Harris Welding Supplies

    Harris 308L Stainless Steel Solid MIG Welding Wire .030 - 10 lbs. ER308L 308L contains an average .03% carbon, producing a weld deposit with good resistance against intergranular corrosion caused by carbide precipitation. 308L is commonly used for welding AISI types 304L, 308L, 321, and 347.

  • Stainless Steel Electrodes - ESAB

    Arcaloy 308L-16 electrodes were developed for the welding of Type 304L stainless steels but can be used for many other stainless steels including Types 301, 302 & 304. They are used extensively for the welding of chemical plant equipment and [Read more]

  • OK Tigrod 308L - ESAB

    OK Tigrod 308L | OK Tigrod 308L has a good general corrosion resistance. The alloy has a low carbon content which makes this alloy particularly recommended where there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers. For joining of stainless steels of 18% Cr - 8% Ni-type with low carbon

  • Corrosion of 308L weld Metal - American Welding Society

    Not logged in American Welding Society Forum. Have you ever welded an E6013 electrode on a stainless steel plate? In this case weld metal appears like a stainless steel. By H.Dibben Date 05-08-2003 17:18 The rust was just on the weld. If the weld was cleaned with contaminated tools, then there should be a fairly wide band of rust, but this

  • 316l pipe to 304 L O-Let - American Welding Society

    Per AWS D1.6 308L is the reccommended filler material between 304L and 316L. In generall 308L or 309L are the two preferred filler metals for 304L to most any other austenitic stainless steel. 308L was designed specifically for the purposes of joining austenitic stainless steel and as welding-consultant mentioned has a higher ferrite content compared to 304 or 316L 316 could be used but it's

  • Shield-Bright 308L

    Shield-Bright 308L was developed for welding type 304L stainless steel and can also be used for welding types 301, 302, and 304 steels. It may also be used for welding types 321 and 347 if the service conditions do not exceed an approximate of 750°F (399°C).

  • Product Details - Hobart Brothers Performance Welding Products

    Used to weld Types 201, 302, 304 and 308 stainless steels. Can also be used for joining some dissimilar 300 series steels. Has a low carbon content to help prevent intergranular corrosion.

  • S-308L.16N (Rev.01) [호환 모드] - HYUNDAI WELDING

    s -308l.16n shielded metal arc welding consumable for welding of 18% cr-8% ni stainless steel rev. 01 hyundai welding co., ltd.

  • 308L Welding Rod - stainless steel sheets suppliers in China

    Welding Electrodes 308-16, Welding Electrodes 308-16 . welding rod 308l -16 steel welding electrode. Dingzhou Jinlong Metal Production Co., Ltd. US $900-1500 / Ton . 5 Tons (Min. Order) Contact Supplier .

  • Material safety data sheet Stainless steel covered electrodes

    Material safety data sheet Stainless steel covered electrodes Date of issue: Feb 2005 (Issue 2: Rev 3) 16. OTHER INFORMATION We refer to: USA: American National Standard Z49, 1 ”Safety in Welding and Cutting”, American Welding Society, 550 North Le Jeune Road, Miami, Florida, 33135; OSHA Safety and Health Standards, 29CFR 1910,

  • OK Tigrod 308L - ESAB

    OK Tigrod 308L has a good general corrosion resistance. The alloy has a low carbon content which makes this alloy particularly recommended were there is a risk of intergranular corrosion. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers. For joining of stainless steels of 18% Cr - 8% Ni-type with low carbon content and Nb

  • Hobart Filler Metals Stick Welding Electrodes — Stainless

    These Hobart Stick Welding Electrodes are stainless steel 3/32in. electrodes with 308 and 304 stainless base metal. The electrodes deliver smooth, tough welds with the strength, corrosion and crack resistance needed for welding stainless steel in all positions.

  • Stainless Steel Stick E308L-16 1/8" 5LB Stick Electrode

    Stainless Steel E308L-16 1/8" 5LB STICK ELECTRODE WELDING ROD DESCRIPTION: E308L-16 electrodes are used to weld unstabilized 18-8 stainless steels such as Types 301, 302, 304, 305, and 308. Weldcote Metals E308-16 electrodes provide corrosion resistance and physical properties equal to or greater than the steels for which they are recommended.

  • ER308L 1/16" x 36" 1-Lb Stainless Steel TIG Welding Filler

    Find many great new & used options and get the best deals for ER308L 1/16" x 36" 1-Lb Stainless Steel TIG Welding Filler Rod 1-Lb BEST PRICE! at the best online prices at eBay! Free shipping for many products! Top quality name brand INWELD AWS Inweld Stainless Steel 308L 1/16" x 36" 1lb Stainless tig wire .

  • SAFETY DATA SHEET (SDS)

    Arcos Industries, LLC – Arcos Stainless Steel Welding Electrodes Rev.3 – 6/19/17 Page 1 of 15 SAFETY DATA SHEET (SDS) Document Number: SDS-ARC-SS-0001 1. IDENTIFICATION Product Type: Arcos stainless steel bare wire electrodes for arc welding Product Names: 16 -8 2, 307, 308/308L, 308H, 308LSi, 309/309L, 309LSi, 310, 312, 316/316L,

  • ER308L - Stainless Steel TIG Welding Rod - 10lb. Pack [ER

    ER308L AWS A5.9 CLASS ER 308L. ER308L is similar to 308 but contains an average .02% carbon producing a weld deposit with good resistance against inter-granular corrosion caused by carbide precipitation. 308L is commonly used for welding AISI types 304L, 308L, 321 and 347. (Rods priced per lb, sold in 10 lb boxes) Certificate of Compliance for